Commercial Traders

Commercial Traders

Hours

Friday:
9:00 AM - 9:00 AM
Saturday:
Closed
Sunday:
Closed
Monday:
9:00 AM - 4:00 PM
Tuesday:
9:00 AM - 4:00 PM
Wednesday:
9:00 AM - 9:00 AM
Thursday:
9:00 AM - 9:00 AM

Chamber Rating

4.9 - (9 reviews)
8
1
0
0
0
Read Our 9 Reviews

Chamber Rating

4.9 - (9 reviews)
8
1
0
0
0
  • Panida Wongchanon (Ellie)

    Hello potential fellow customers! I placed an order online for a ALTI 1800 X 750 DESK on a very late Thursday night. Three packages arrived on Monday, the condition of the packages were ok. The desk board was a nice solid piece wrapped very nicely. I appreciate when products online advise customers that assembly is required, which they did mention on their website. I.e. Cordless drill needed to attach the top to the frame and an Allen key set. I wasn't sure if it was one person job... but I managed to do this all by myself! :D surprisingly... I started off with the desk board laid flat on the floor and placed the beam sliders on top of the board with the clamps pre-clipped on + placed the legs flats to align to beams correctly and used a pencil to mark where the pilot holes needed to be drilled into. I made sure the beam sliders were the same length and tightened them with a Allen key - at this point I had to decide if I wanted the bolts for the slider to be accessible or if I prefer to have a cleaner look, I decided to have the side with the bolts face the desk for the cleaner look. I proceeded to start with the construction of the frame. They have this interesting metal bolt joint that slips into the beam holes - looks sturdy. I loosen the joint thing with a smaller Allen key and it comes apart form the legs - now its was a process of repeat x4. Flip the legs downwards so that the legs are pointing up - check. bolts pointing down on the beam sliders - check. Slip the beam ends into the rectangular holes and join them together with the included bolts. -Flip it over- I proceeded to place the table frame to where I wanted it to go and adjusted the feet height aligners. -Flip frame over- again :D Now... the scary part... don't drill through the desk x'D lmao... -Get the desk board and place it flat on the floor- I used and electric drill to create pilot holes with a 3mm Drill bit - I followed my pencil marks for this part. I placed the frame on the desk board and installed the included clamps and screws used to attach the beams and the desk board. -Flip it over- and you have a desk :D I placed a heavy PC, monitor clamp mic clamps and speakers. its doesn't look like it with break any time soon. Definitely worth the money. additional information ... (The downside was the slight dent marks from the corner protectors + one part of the board seems to not be flat on the edge? It doesn't bother me because its on the underside. One of the slider beams joint hole was slightly misaligned, this may have been due to the lack of padding at the ends of the box, I managed to fit the joint mechanism in with a rubber hammer.) (I was given Black clamps, the photo shows White clamps, the order was for a White top and White bottom combo, so I assume it was going to be White -but its ok :D cause no one can see it anyway lol..) Also - if you want to pay with Afterpay, you need a Shopify account. :)
    Aug 25th, 2022

  • Brian Hogan

    Very happy with my purchase, Great quality desk and simple. Perfect for a home office desk in the lounge. Easiest desk ever to put up 4 pieces done in 5-10 mins :-) Highly recommend this company for good service also. Thanks heaps
    Feb 6th, 2022

  • King Saua Ioane Faalelelei

    I bought an office chair from these guys. Excellent service and delivery were quick. I love my chair and can't recommend them enough.
    Oct 8th, 2021

  • Ricky Sullivan

    Charging $18.40 to have a cable management tray delivered to Waipa district is highway robbery. Purchased a product at the listed price of $44.85 (inc GST). Because of the confusions around adding shipping (wasn't obvious from a mobile device) I found out that I needed to pay extra for shipping, and was invoiced $18.40. I then received email saying that the listed price on the website was incorrect and should have been $51.75 (inc GST) and that's why there was a big difference between the invoices. If you list the price incorrectly, honour it and don't on charge the cost when you've made a mistake. The shipping invoice should not have included this "error" fee.
    Sep 18th, 2021

  • Daymon Nin

    Great to deal with, Mark went out of his way to help me with getting the right chair. Highly recommended.
    Nov 4th, 2020

Read Our 9 Reviews

About
Commercial Traders

Commercial Traders is located at 36 Alfred St in Te Papapa, Auckland 1061. Commercial Traders can be contacted via phone at (649) 634-4078 for pricing, hours and directions.

Contact Info

  •   (649) 634-4078

Questions & Answers

Q What is the phone number for Commercial Traders?

A The phone number for Commercial Traders is: (649) 634-4078.


Q Where is Commercial Traders located?

A Commercial Traders is located at 36 Alfred St, Te Papapa, AUK 1061


Q What is the internet address for Commercial Traders?

A The website (URL) for Commercial Traders is: https://commercialtraders.co.nz/


Q What days are Commercial Traders open?

A Commercial Traders is open:
Friday: 9:00 AM - 9:00 AM
Saturday: Closed
Sunday: Closed
Monday: 9:00 AM - 4:00 PM
Tuesday: 9:00 AM - 4:00 PM
Wednesday: 9:00 AM - 9:00 AM
Thursday: 9:00 AM - 9:00 AM


Q How is Commercial Traders rated?

A Commercial Traders has a 4.9 Star Rating from 9 reviewers.

Hours

Friday:
9:00 AM - 9:00 AM
Saturday:
Closed
Sunday:
Closed
Monday:
9:00 AM - 4:00 PM
Tuesday:
9:00 AM - 4:00 PM
Wednesday:
9:00 AM - 9:00 AM
Thursday:
9:00 AM - 9:00 AM

Ratings and Reviews
Commercial Traders

Overall Rating

Overall Rating
( 9 Reviews )
8
1
0
0
0
Write a Review

Panida Wongchanon (Ellie) on Google

image Hello potential fellow customers!
I placed an order online for a ALTI 1800 X 750 DESK on a very late Thursday night. Three packages arrived on Monday, the condition of the packages were ok. The desk board was a nice solid piece wrapped very nicely.
I appreciate when products online advise customers that assembly is required, which they did mention on their website. I.e. Cordless drill needed to attach the top to the frame and an Allen key set.
I wasn't sure if it was one person job... but I managed to do this all by myself! :D surprisingly...
I started off with the desk board laid flat on the floor and placed the beam sliders on top of the board with the clamps pre-clipped on + placed the legs flats to align to beams correctly and used a pencil to mark where the pilot holes needed to be drilled into.
I made sure the beam sliders were the same length and tightened them with a Allen key - at this point I had to decide if I wanted the bolts for the slider to be accessible or if I prefer to have a cleaner look, I decided to have the side with the bolts face the desk for the cleaner look.
I proceeded to start with the construction of the frame.
They have this interesting metal bolt joint that slips into the beam holes - looks sturdy. I loosen the joint thing with a smaller Allen key and it comes apart form the legs - now its was a process of repeat x4.
Flip the legs downwards so that the legs are pointing up - check.
bolts pointing down on the beam sliders - check.
Slip the beam ends into the rectangular holes and join them together with the included bolts.
-Flip it over-
I proceeded to place the table frame to where I wanted it to go and adjusted the feet height aligners.
-Flip frame over- again :D
Now... the scary part... don't drill through the desk x'D lmao...
-Get the desk board and place it flat on the floor-
I used and electric drill to create pilot holes with a 3mm Drill bit - I followed my pencil marks for this part.
I placed the frame on the desk board and installed the included clamps and screws used to attach the beams and the desk board.
-Flip it over- and you have a desk :D
I placed a heavy PC, monitor clamp mic clamps and speakers.
its doesn't look like it with break any time soon.
Definitely worth the money.
additional information ...
(The downside was the slight dent marks from the corner protectors + one part of the board seems to not be flat on the edge? It doesn't bother me because its on the underside. One of the slider beams joint hole was slightly misaligned, this may have been due to the lack of padding at the ends of the box, I managed to fit the joint mechanism in with a rubber hammer.)
(I was given Black clamps, the photo shows White clamps, the order was for a White top and White bottom combo, so I assume it was going to be White -but its ok :D cause no one can see it anyway lol..)
Also - if you want to pay with Afterpay, you need a Shopify account. :)


Brian Hogan on Google

image Very happy with my purchase, Great quality desk and simple. Perfect for a home office desk in the lounge. Easiest desk ever to put up 4 pieces done in 5-10 mins :-) Highly recommend this company for good service also. Thanks heaps


King Saua Ioane Faalelelei on Google

image I bought an office chair from these guys. Excellent service and delivery were quick. I love my chair and can't recommend them enough.


Ricky Sullivan on Google

image Charging $18.40 to have a cable management tray delivered to Waipa district is highway robbery. Purchased a product at the listed price of $44.85 (inc GST). Because of the confusions around adding shipping (wasn't obvious from a mobile device) I found out that I needed to pay extra for shipping, and was invoiced $18.40. I then received email saying that the listed price on the website was incorrect and should have been $51.75 (inc GST) and that's why there was a big difference between the invoices. If you list the price incorrectly, honour it and don't on charge the cost when you've made a mistake. The shipping invoice should not have included this "error" fee.


Daymon Nin on Google

image Great to deal with, Mark went out of his way to help me with getting the right chair. Highly recommended.


Load More Reviews

Overall Rating

Overall Rating
( 9 Reviews )
8
1
0
0
0

Write a Review

RATING:
Create 1 Star Review Create 2 Star Review Create 3 Star Review Create 4 Star Review Create 5 Star Review

Office Furniture Store Near Me in Te Papapa, AUK

Precision Office Furniture, Stationery and Computer Services
33A Alfred St
Te Papapa, AUK 1061
(649) 622-0922
( 33 Reviews )
Office Buy Ltd
262 Church St
Te Papapa, AUK 1061
64800946946
( 0 Reviews )
Office Chairs in Auckland
2/894 Great South Rd
Te Papapa, AUK 1061
(649) 622-0097
( 0 Reviews )
Office Clearance Company
726A Great South Rd
Te Papapa, AUK 1061
(649) 525-1907
( 13 Reviews )
ChamberofCommerce.com
Loading